Untitled

The TP-Link TD-W9970 is for use on any service on networks using Bell”s DSL infrastructure. To learn more about configuring your particular modem, consult the manual.

Đang xem: Tp

Routed

The TP-Link TD-W9970 modem router supports both ADSL and VDSL, and switches automatically to match the line it is connected to.

VDSL

Routed | VDSL | ADSL | DNS Fix | UPnP | Time | Manage Control | CWMP | Firewall ♦ Bridge | VDSL | ADSL ♦ See Also

We will start with the mode used for VDSL connections.

If the modem is new, a user name of admin and password of admin will gain access to the modem configuration. If the modem is not new, it is recommended to reset the modem to the factory default settings by holding down the Reset/Wi-Fi button for 6 to 9 seconds before continuing to Quick Setup Step 1 below.

Quick Setup

1. Once you access the modem from your browser at http://192.168.1.1 and login (user name: admin and password: admin), click the Quick Setup link in the Menu on the left.

Xem thêm: Tải Trò Chơi Ultraman : Legend Of Heroes Apk + Obb 1, Ultraman Battle Online

Then click Next on the Quick Setup-Start page.

Xem thêm: Tổng Hợp Các Cách Chơi Bài Cào Cơ Bản Cho Những Người Tập Chơi

*

Region and Time Zone

Set Region to Canada Time Zone to (GMT-05:00) Eastern Time (US & Canada) Click Next

*

Auto Detection

Click on No, I want to configure The Internet Connection myself Click Next

*

DSL

ISP: Other L2 Interface Type: VDSL Enable VLAN ID: checked VLAN: 35 Connection Type: PPPoE Click Next

*

PPPoE

rev-conf.org.ca (where ab123 is your rev-conf.org ID) Password: •••••••• (where •••••••• is your rev-conf.org DSL Password) Confirm password: •••••••• Click Next

*

3G/4G

Click Next

*

Wireless

IMPORTANT NOTE: The Quick Setup process will not set the Wireless Security to use WPA2 exclusively with AES– this means more recent devices connecting to the device may warn of insufficient security when connecting over Wi-Fi. To avoid this, after completing the Quick Setup, access the Wireless settings for the device, and ensure only WPA2 is selected for the Security protocol, and AES for the encryption method. A selection of WPA/WPA2 and AES/TKIP is less secure and will cause newer device to issue warnings.

Wireless: Enable Wireless Network Name (SSID): rev-conf.org_XXXX (where XXXX are the last 4 digits of the modem serial number) Channel: Auto Mode: 11n only Security: WPA2 Password: DSL Password Click Next

*

Leave a comment

Your email address will not be published. Required fields are marked *